Rust Remover 206

Rust remover 206


Our rust remover is specially designed to prepare metal surfaces for painting.

Reference: RUST REMOVER 206




This product phosphates and removes grease and rust. In addition to rust conversion and grease removal, this product provides phosphating and neutralising action to prevent any oxide from forming under the coat of paint. It enables better adhesion for all types of paints. It can be used cold or hot (maximum 90°C). Hot application requires less immersion time.


– Complex acid mixtures
– Surfactants
– Contains phosphoric acid
– Density: approximately 1.40
– Active substance content: 40%
– pH: 1
– Non-flammable
– Water-miscible


The product can be used pure except when dip coating. Do not mix with other products. Eliminate any impurities with the metal brush. Leave to soak for at least 24 hours. Then allow to dry in the open air. A grey colour forms a protective layer. If insufficient, repeat the process. Do not put put parts into contact in the bath (electrical circuit).
Aluminium: Reduce the immersion concentration and time. Parts which have been modified or received surface treatment: the treatment may remove previous preparations.


Industries, public works, paint workshops, etc.

These recommendations are based on our knowledge to date and were determined according to product characteristics and, if necessary, the applications for which it is recommended. On this basis and according to good professional practice, it is your responsibility to take into account all the factors concerning your activity, such as the conditions under which the product is used, the types of mixtures used and the reasonably foreseeable use of your product. Pelicoat France shall not be held liable in the event of incidents resulting from the use of one of its products for purposes or under conditions other than those recommended in the safety documents provided by the company, nor in cases where the safety rules and precautions observed in your profession have not been complied with.

This sheet may refer to regulations. However, it does not include an exhaustive list of the promulgated regulations at the time of writing, and in no case shall it exempt the user from referring to all official regulations to have knowledge of the obligations with which must comply.



The content of this documentation is based on our present knowledge and experience of the product. PELICOAT FRANCE expressly disclaims all liability if the user does not follow the technical and the security recommendations and conditions of use of its products, especially but not exclusively in the case of faulty application, application by untrained personnel, use of products not compatible with PELICOAT FRANCE products, or incompatible weather conditions.
It is the user’s sole responsibility to inquire on and to respect local laws and regulations especially regarding safety at work, working conditions, and the protection of the environment. For every product, preliminary tests must be carried out before treating all other parts.

Rust Remover 206